Разделы и параметры реестра Visio (в процессе перевода). VISIO Registry Sections and Settings ==================================== Copyright (c) 1999 Visio Corporation. All rights reserved. Что такое реестр Visio. About VISIO registry entries =============== Программа Visio использует реестр Visio для хранения настроек, данных о пользователе и другую информацию. Чтобы сократить количество хранимых данных, программа записывает в реестр только часто используемые и измененные пользователем параметры. Visio uses the windows registry to store user settings and other application information. To keep the entries in the registry to a minimum, Visio automatically writes out only those settings that are not default and a few others that are useful (for example, file paths, import and export filters, and last files). Для записи всех возможных параметров программы проделайте следующее: To include all possible settings in the registry: 1. Запустите Visio. 1. Launch your Visio 2000 product. 2. Выберите в меню, Сервис>Параметры. 2. Select Tools>Options from the menu. 3. Откройте вкладку Специальные. 3. Select the Advanced tab in the Options Dialog. 4. Установите галочку "Записать настройки в реестр Windows" 4. Check Put all settings in Windows registry. 5. Нажмите ОК. 5. Click Ok. 6. Выйдите из программы. 6. Quit Visio. Примечание: Теперь все текущие значения параметров записаны в реестр Windows. И теперь все они находятся в разделе реестра по пути: Note: All of the entries will now be written to the Windows registry. They can be found in the following section of the Windows registry: Для пользователей Visio 2000: HKEY_CURRENT_USER\Software\Visio\Visio 2000 Для пользователей Visio 2002: HKEY_CURRENT_USER\Software\Microsoft\Visio\application Для пользователей Visio 2003: HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Visio\application Описание VISREG.TXT About VISREG.TXT ================ Этот файл описывает параметры, которые могут оказаться полезными. Все разделы представлены как и в реестре в алфавитном порядке. This file describes registry entries that you may find useful. Sections are presented in the order they appear in the Windows registry. Entries in each section are presented in alphabetical order, for easier reading. Entries typically do not appear in alphabetical order in the Windows registry. Некоторые параметры не описаны в этом файле, они используются для внутренних целей или пока не используются. Some entries in Windows registry are reserved for internal or future use. These entries are not documented in VISREG.TXT. Раздел [application] [application] section ===================== Раздел [application] включает настройки самой программы Visio. The [application] section includes settings that are application-wide in scope. AddonsPath=Solutions (Путь к надстройкам) -------------------- Местоположение программ-надстроек. The location of Visio add-on executables (programs written in Visual Basic or another programming language that supports Automation) and Visio add-on libraries. Can be relative to the location of VISIO.EXE or fully qualified. Данный параметр может быть настроен из программы. Сервис>Параметры>Расположение>Надстройки. AltFilterINIFile=VISIO.INI (Другой файл настроек графических фильтров) -------------------------- Если параметр INIFileForFilters=2, то данный используется для указания имени .INI файла. If INIFileForFilters=2, use this setting to specify the .INI filename. AltFilterINIFileExportSect=Exports (Другой файл настроек графических фильтров раздела экспорта) ---------------------------------- Если параметр INIFileForFilters=2, то данный параметр используется для указания имени раздела экспорта в .INI файле указанного в параметре AltFilterINIFile. If INIFileForFilters=2, use this setting to specify the name of the Export section in the .INI file set by AltFilterINIFile. AltFilterINIFileImportSect=Imports (Другой файл настроек графических фильтров раздела импорта) ---------------------------------- Если параметр INIFileForFilters=2, то данный параметр используется для указания имени раздела импорта в .INI файле указанного в параметре AltFilterINIFile. If INIFileForFilters=2, use this setting to specify the name of the Import section in the .INI file set by AltFilterINIFile. Animation=60000 --------------- Время в миллисекундах между обновлениями Now() функции в формулах ТаблицыФигур. По умолчанию оно равно минуте. Для более частых обновлений Now() функции, установите значение Animation меньшим, например 125. The time in milliseconds between evaluations of the NOW() function in ShapeSheet formulas. The default is one minute. To evaluate NOW() more frequently, set Animation to a smaller value, such as 125. AreaSelection=0 ------------- Устанавливает режим работы выделения нескольких фигур курсором. Determines the mode of selection when using the pointer tool to drag a selection net around shapes. 0 Выделять фигуры охваченные прямоугольником выделения полностью (параметр по умолчанию). 0 Only shapes entirely within the selection net are selected 1 Выделять фигуры охваченные частично. 1 Shapes partially within the selection net are selected Данный параметр может быть настроен из программы. Сервис>Параметры>Черчение>Выделять фигуру при ее неполном охвате. AutoStartIME=0 -------------- Параметр настройки Азиатских шрифтов. Determines whether to enable the Input Method Editor (IME) when the user starts Visio. The IME assists the user in entering characters from multi-byte character sets, typically used on Far East systems. 0 Do not automatically enable the IME. 0 Отключен. 1 Automatically enable the IME. 1 Включен по умолчанию. Данный параметр может быть настроен из программы. Сервис>Параметры>Региональные>Включить IMER по умолчанию. BiDiMode=0xFFFF --------------- Настройки для двунаправленного письма. When Visio displays a line of text, it calculates the position of characters in the line multiple times to achieve optimal spacing between the characters. This ensures that text on the screen exactly matches the text when printed. If the text mixes characters from languages that run in different directions-- for example, English (left to right) and Arabic or Hebrew (right to left), attempting to achieve optimal spacing may cause reversed or missing characters. Use the BiDiMode setting to control Visio behavior when displaying bidirectional text. 0 Make multiple calculations to achieve optimal character spacing. Recommended for single-language text. 0 Рекомендовано для письма на одном языке. 1 Make a single run, regardless of system settings. 0xFFFF Use Windows international system settings. Recommended for mixed-language, bidirectional text. 0xFFFF Рекомендовано для двух и более языков и направлений письма. BlastFlag=1 ----------- Сохранять локальные настройки стиля? Determines the default behavior with respect to local formulas when styles are applied from the toolbar. 0 Да. Zero Keep local formulas. Не ноль - Нет. Non-zero Reset local formulas. Данный параметр может быть настроен из программы. Формат>Определить стили>Сохранять локальные настройки стиля. BuiltDirectoryCache=0 --------------------- Обновить директории программы? Non-zero indicates that the Visio directory cache has been built and saved in VISIO.BIN. Set this value to 0 if you want to force Visio to rebuild this cache. Не ноль - нет. Ноль - да. ChunkyDraw= 350 --------------------- This number represents the number of milliseconds between each successive bit transfer of the offscreen drawing buffer to the screen. A value of zero turns off ChunkyDraw, which results in a single bit transfer to the screen for each drawing window update (WM_PAINT message). DrawOffscreen must be turned on (DrawOffscreen=1) for this number to have any effect. CircularTestLimit=20 -------------------- The number of times a cell is recalculated before it is tested for inclusion in a cirular reference. CubicTolerance=5 ---------------- How closely Visio follows the mouse pointer when drawing a freeform curve, or spline: the lower the number, the more closely Visio follows the pointer. The CubicTolerance setting corresponds to the Smoothing option in the FreeForm Drawing section in the Options dialog box. CustomCommonDialog=1 -------------------- Determines which dialog boxes Visio uses. Zero Use the Windows default dialog box templates. Non-zero Use the Visio custom templates for the common dialog boxes (File Open, File Save, Save As, and so forth). CustomMenusFile = ------------------ The name and path of a file that contains custom menus and accelerators to use for all instances of Visio. CustomToolbarsFile = --------------------- The name and path of a file that contains custom toolbars and status bars to use for all instances of Visio. Default3LegConnectorFile = ------------------------ The name of an alternate file that contains a 3-legged connector. Default3LegConnectorName = ------------------------ The name of the master shape in the file specified in Default3LegConnectorFile. Default5LegConnectorFile = ------------------------ The name of an alternate file that contains a 5-legged connector. Default5LegConnectorName = ------------------------ The name of the master shape in the file specified in Default5LegConnectorFile. DefaultCurrencyFmt=0 -------------------------- DefaultCurrencyFmt determines how Visio formats currency when it is displayed as a string. The default setting, zero, uses the formatting specified in the user's international system settings. Non-local currency is displayed using the local currency settings for thousands and decimal separators and positive/negative format, but uses the ISO 4217 three-character currency mnemonic for the currency symbol, displayed after the value separated by a space. DefaultCurrencyFmt is a mask that allows you to control several related formatting options. You simply add together the options you want to set. DefaultCurrencyFmt affects formatting of all currency within the application. The mask is easiest to understand in its hexadecimal format, because most values are powers of 2. Both the hex and decimal values are listed below. To control the displayed currency symbol, chose one of the following: 0x0000 or 0 Local currency uses the symbol defined by the international settings. Non-local currency uses its ISO 4217 three-character mnemonic. 0x0200 or 512 Both local and non-local currency use their local symbol. 0x0400 or 1024 Both local and non-local currency use ISO 4217 three-character. To control the display format of positive and negative currency values, chose one of the following: 0x0000 or 0 Use the user's international settings. 0x0100 or 256 Use the explicit settings defined below. Explicit negative formats: 0x0000 or 0 ($1.1) 0x0001 or 1 -$1.1 0x0002 or 2 $-1.1 0x0003 or 3 $1.1- 0x0004 or 4 (1.1$) 0x0005 or 5 -1.1$ 0x0006 or 6 1.1-$ 0x0007 or 7 1.1$- 0x0008 or 8 -1.1 $ 0x0009 or 9 -$ 1.1 0x000A or 10 1.1 $- 0x000B or 11 $ 1.1- 0x000C or 12 $ -1.1 0x000D or 13 1.1- $ 0x000E or 14 ($ 1.1) 0x000F or 16 (1.1 $) Explicit positive formats: 0x0000 or 0 $1.1 0x0010 or 16 1.1$ 0x0020 or 32 $ 1.1 0x0030 or 48 1.1 $ DefaultFontCharset=0xFFFF ------------------------- The character set of the default font as defined in the Windows logical font structure for that font. Common character set values are 0 for ANSI, 2 for Symbol, and 255 for OEM (system-dependent). DefaultFontFamily=0xFFFF ---------------------- The font family to which the default font belongs, as defined in the Windows logical font structure for that font. DefaultFontName = --------------------- The name of the font to use as the default. If you format text in the default font, Visio automatically uses whatever font is defined as the default on the user's system. This method allows a more flexible mapping of fonts. The default font is displayed at the top of the font list in angle brackets (< >) if ShowDefaultFont is non-zero. The default font also has the value 0 in the Font cell of the Characters section of the ShapeSheet. Developer=0 ----------- Включить режим Разработчика? Не ноль - Да. Ноль - нет. Non-zero enables certain developer Visio UI functionality. DontShowWelcomeDialog=0 ----------------------- Не ноль - отключает диалоговое меню после загрузки. Non-zero disables the Welcome to Visio 2000 dialog upon launch. DragBitmap=3 ------------ Determines whether Visio creates a bitmap representation of a dragged shape or master while waiting to drop the shape or master. 0 Do not create a bitmap representation. Only an outline of the shapes(s) is displayed. 1 A bitmap representation of the shape(s) is displayed after the duration specified by the MousePauseTime setting. (Default behavior for releases prior to 5.0c.) 2 A bitmap representation of the shape(s) is always displayed. 3 A bitmap representation of the shape(s) is always displayed unless the selection exceeds 25 shapes, one or more bitmaps, or one or more metafiles. Behavior will then default to the behavior described in DragBitmap=1. DrawingsPath=Drawings --------------------- The default path for saving Visio drawings. Can be relative to the location of VISIO.EXE or fully qualified. Multiple paths are separated by a semicolon. If a Drawings directory doesn't exist, Visio will use the Explorer Shell Folder for personal document storage (usually "My Documents"). DrawOffscreen= 1 --------------------- To enable flicker-free redraw, drawing can be done to an offscreen buffer, then a bit transfer to the screen. 0 turns off offscreen drawing (normal drawing for releases prior to 5.0c). 1 turns on offscreen drawing. EditInPlaceOnInsertObject=1 --------------------------- 0 Edit in the full Visio window when inserting a Visio embedded object into another OLE 2.0 container application. 1 Use in-place editing when inserting a Visio embedded object. EventsEnabled=1 --------------- Non-zero enables Visio events to be sent to Visio add-ons and VBA macros. Zero disables all Visio events. FaceDialogLabel=??? ----------------------------- The typeface used in dialog box labels, such as "MS Sans Serif". "???" tells Visio to use the current system defaults. FaceMasterIconAndName=??? --------------------------- The typeface used in the stencil window when both icons and names are displayed, such as "Arial". "???" tells Visio to use the current system defaults. FaceMasterNameOnly=??? -------------------------------- The typeface used in the stencil window when only master names are displayed, such as "MS Sans Serif". "???" tells Visio to use the current system defaults. FacePIPCaption=??? -------------------- The typeface used in the floating stencil window when Visio is activated for in-place editing, such as "Arial". "???" tells Visio to use the current system defaults. FaceRuler=??? --------------- The typeface used in the ruler, such as "Arial". "???" tells Visio to use the current system defaults. FaceShapeSheet=??? ------------------------------ The typeface used in the ShapeSheet, such as "MS Sans Serif". "???" tells Visio to use the current system defaults. FaceStencil=??? --------------- The typeface used in the stencil, such as "MS Sans Serif". "???" tells Visio to use the current system defaults. FaceTip=??? ------------- The typeface used in the tip window, such as "Arial". "???" tells Visio to use the current system defaults. FilterLibrary32=ISGDI32.DLL ------------------------ The name of the main library used by all of the filters. FiltersPath32=System\Filter32 ----------------------------- The location of import and export filters. Can be relative to the location of VISIO.EXE or fully qualified. The import and export filters must match the .DLL file specified by the corresponding FilterLibrary setting. FontSizeDialogLabel=0xFFFF ---------------------- The point size of text in dialog box labels. "0xFFFF" tells Visio to use the current system defaults. FontSizeMasterIconAndName=0xFFFF --------------------------- The point size of text used in the stencil window when both icons and names are displayed. "0xFFFF" tells Visio to use the current system defaults. FontSizeMasterNameOnly=0xFFFF ------------------------ The point size of text used in the stencil window when only master names are displayed. "0xFFFF" tells Visio to use the current system defaults. FontSizePIPCaption=0xFFFF --------------------- The point size of text in the floating stencil window when Visio is activated for in-place editing. "0xFFFF" tells Visio to use the current system defaults. FontSizeRuler=0xFFFF --------------- The point size of text in the ruler. "0xFFFF" tells Visio to use the current system defaults. FontSizeShapeSheet=0xFFFF -------------------- The point size of text displayed in the ShapeSheet window. "0xFFFF" tells Visio to use the current system defaults. FontSizeStencil=65535 --------------------- The point size of text in the stencil. "0xFFFF" tells Visio to use the current system defaults. FontSizeTip=0xFFFF ------------- The point size of text used in the tip window. "0xFFFF" tells Visio to use the current system defaults. FPEAlertCount=0 --------------- The number of times the Floating Point Exception alert box is displayed when a floating point exception occurs. GengoData1=yyyy/mm/dd,english_short,kanji_short,kanji_long GengoData2=yyyy/mm/dd,english_short,kanji_short,kanji_long ---------------------------------------------------------- The Japanese version of Visio has built-in date information for the Emperors Meiji, Taishou, Shouwa, and Heisei. If new emperor(s) come to power between releases of Visio, the user can customize gengo date information by setting these entries. If both GengoData1 and GengoData2 are set, GengoData2 should be later chronologically. Dates are formatted at run time, so these entries should be updated in all VISIO.INI files on all systems, or the date may be formatted differently on different systems. yyyy/mm/dd The first date of the new emperor's reign. english_short The English abbreviation of the emperor's name (used by the "g" date format). kanji_short The Kanji short name of the emperor (used by the "gg" and "G" formats). kanji_long The Kanji long name of the emperor (used by the "ggg" and "GG" formats). GridNonPage=0 ------------- Non-zero Display a grid on the pasteboard. GreekTextSize=4 --------------- Minimum font size that text will be displayed. HeightPIPCaption=0xFFFF ------------------ The height of the caption in the floating stencil window when Visio is activated for in-place editing. "0xFFFF" tells Visio to use the current system defaults. HelpPath=Help;Solutions ----------------- The location of help files for templates and stencils. HideVerticalFonts=0 ------------------- Zero to display vertically-oriented fonts in the Visio font list, or non- zero to hide vertically-oriented fonts. Although Visio does not provide true vertical text composition, you can get the effect of vertical text by using a vertical font and resizing the text box to force a single- character column. A vertical font is designated with a @ as the first character of its name. Vertical fonts are typically used on Far East systems. IMEDefaultFontCharset=0xFFFF ---------------------------- The character set of the default font to be used by the Input Method Editor (IME), as defined in the Windows logical font structure for that font. The Visio default for Japanese is the ShiftJIS character set. The following are examples of typical settings: 128 ShiftJIS 129 Hangeul 134 GB2312 136 ChineseBig5 0xFFFF causes Visio to use Windows international system settings. IMEDefaultFontFamily=0xFFFF --------------------------- The font family to which the default IME font belongs, as defined in the Windows logical font structure for that font. 0xFFFF causes Visio to use Windows international system settings. IMEDefaultFontName=??? ---------------------- The name of the font to use as the default in the IME. If you format text in the default font, Visio automatically uses whatever font is defined as the default on the user's system, which allows a more flexible mapping of fonts. The string "???" causes Visio to use Windows international system settings. INIFileForFilters=0 ------------------- Indicates where to look for information about import and export filters. Zero Use the [VisioImports] and [VisioExports] sections of VISIO.INI. 1 Use the [MS Graphic Import Filters] and [MS Graphic Export Filters] sections of WIN.INI. 2 Use the [AltFilterINIFileImportSect] and [AltFilterINIFileExportSect] sections of the file specified by AltFilterINIFile. InPlaceWidth=5.5 in. InPlaceHeight=3.0 in. --------------------- The default width and height of the Visio embedded object when it is edited in-place. IsMultiByteAware=0 ------------------ Non-zero to handle multi-byte character sets, typically used on Far East systems. Setting IsMultiByteAware to a non-zero value may cause Visio to run more slowly, but it will run more reliably when using a multi-byte character set. LastFile1=FLOWCHT.VSD LastFile2= LastFile3= LastFile4= LastFile5= LastFile6= LastFile7= LastFile8= LastFile9= --------------------- The last nine files used in Visio. These appear on the File menu under the Exit command. For example, if LastFile1=FLOWCHT.VSD, 1 FLOWCHT.VSD appears on the File menu under the Exit command. LastStencil=Basic Shapes.vss --------------------- The last stencil file selected with the Open Stencil command. LastTemplate(n)=Basic Diagram.vst ---------------------- The list of the last 9 template files selected with the New command. LinesAndTextPrintBlack=0 ------------------------ When printing to a PCL printer on Windows NT 3.51, colored lines and text print as white. Set LinesAndTextPrintBlack to a value other than zero to ensure that lines and text print in black. LineTolerance=5 --------------- How far the mouse pointer can deviate from a straight line before Visio starts drawing a freeform curve, or spline: the higher the number, the farther the mouse pointer can deviate. The LineTolerance setting corresponds to the Precision option in the FreeForm Drawing section in the Options dialog box. LiveMouseDynamics=1 ------------------- When you resize or rotate a shape, you can see the shape as it is being transformed, instead of just seeing the bounding box until the action is complete. 0 = Don't show live dynamics 1 = Show live dynamics LoadVBAProjectsFromText=1 ------------------------- Loading VBA projects from text forces recompilation of the VBA project everytime it is loaded by Visio. 0 = Do Not load VBA from text 1 = Load VBA from text LoopLimit = 40 -------------- The maximum number of times Visio processes a dependency loop in a ShapeSheet formula before stopping recalculation. For best results, set LoopLimit to a value greater than 10, because some complicated shapes may legitimately loop several times during recalculation. MacroVirusProtection=0 ------------------ Different options for virus checking. 0 = Don't check for viruses when the user opens files and always enable macros. 1 = Always ask the user what to do. 2 = Always disable macros. 3 = Always refuse to open file with macros. MainDictionaryPath ------------------ The location of the main dictionary to be used by Visio to check spelling of text. MaxDigitsLeftOfDecimal=14 ------------------------ The maximum number of digits to the left of the decimal point in the ShapeSheet. MaxSpellerWordLength=50 ----------------------- The maximum length of the words that can be checked by the Visio spell checker. Words longer than MaxSpellerWordLength are flagged as misspelled, but no suggestions are offered. MeasurementDigits_Dlgs=4 ------------------------ The maximum number of digits to the right of the decimal point in dialog boxes. MeasurementDigits_SheetForm=4 ----------------------------- The maximum number of digits to the right of the decimal point in ShapeSheet formulas. MeasurementDigits_SheetVal=4 ---------------------------- The maximum number of digits to the right of the decimal point in values in the ShapeSheet. MeasurementDigits_StatBar=4 --------------------------- The maximum number of digits to the right of the decimal point in the status bar. MeasurementFlags_Dlgs=49 MeasurementFlags_SheetForm=529 MeasurementFlags_SheetVal=2577 MeasurementFlags_StatBar=529 ------------------------------ The formats used to display numbers in dialog boxes, ShapeSheet formulas or values, or the status bar. To select localized or universal units, use one of the following values: 0 Use the localized full unit name (INCH vs IN) 1 Use the localized abbreviated name (IN. vs INCH) 2 Use the localized formula unit name (" vs INCH) 3 Use the universal unit name To combine other options, add values from the following list: 4 Show the unit label for default unit data 8 Omit unit labels (12 vs 12MI). Takes precedence over other label-related flags. 16 Convert label to lowercase (6in vs 6IN) 32 Include inches even if zero (5'0" vs 5') 64 Use only feet unit (5'6 vs 5'6") 128 Use both units for picas (1P3PT vs 1P3). Also affects display of ciceros. 256 Override with indicated measurement unit 512 Separate value and units with a space 1024 Omit leading zero (.99 vs 0.99) 2048 Fill decimal with zeros (.2500 vs 0.25) 4096 Leading space in positive numbers (' 5' vs '5') 8192 Leading plus in positive numbers ('+5' vs '5'). Takes precedence over 4096 if both are set. 16384 Display as fractions ('2 1/2' vs '2.5'). Works only for denominators 2, 4, 8, ... 64. 32768 Display small values as 0 rather than use scientific notation MinIMEFontSize=8 ---------------- The minimum font size used to display text in the Input Method Editor, which converts phonetic input into glyphs on Far East systems. MouseDetectCreate=3 ------------------- The number of pixels you must move the mouse before Visio detects a drawing action to create a new shape. MouseDetectDrag=3 ----------------- The number of pixels you must move a dragged shape before Visio detects a motion. MousePauseTime=1000 ------------------- The number of milliseconds the mouse must pause before Visio creates a bitmap representation of a dragged shape (see DragBitmap, above). NetFlags=0 ---------- Used to resolve an error 113, 115, or 116 when saving files, particularly to a network or floppy disk drive. These errors tend to occur when a user's network permissions are incompatible with the permissions that Visio needs in order to save files. 1 Remove the user's file naming privileges 3 Remove the user's file rename and delete privileges. NewDocCreateMode=0 ------------------ Determines whether new documents are loaded from a resource or build from scratch 0 = Use application default (from resource) 1 = Load new documents from resource. 2 = Build new documents from scratch. NewDocMetric=0 -------------- Determines whether new documents are built with imperial or metric formulas. 0 = Use application default 2 = Always use imperial formulas. 3 = Always use metric formulas. NewFilesSavePreview=1 -------------------- Non-zero to save a preview picture of the file. This is the same as checking Save Preview Picture in the Properties dialog box. NoVBA=0 ------- Non-zero disables Visual Basic for Applications (VBA) in Visio. OLESizeIncludeBlackBits=1 ------------------------- Non-zero When embedding a Visio object, tightly enclose all of the object's black bits, regardless of the position of the object's alignment box. Zero Clip the object to its alignment box, even if part of the shape is outside of the box. OLEUpdateDelay=10000 -------------------- The number of milliseconds between updates when Visio is embedded. OpenHierarchical=0 ------------------ Non-zero changes the File Menu "Open" menu item into a hierarchical sub-menu, similar to the "New" and "Stencils" sub-menus. OpenPreview=1 ------------- Non-zero to display a preview picture of the file in the Open dialog box. This is the same as checking File Preview in the dialog box. OpenStencilsDocked=1 -------------------- Zero Open stencils in floating windows. Non-zero Open stencils docked in the drawing window. OpenStencilsReadWrite=0 ---------------------- Zero Open stencils with read-only access. Non-zero Open stencils as original (read/write access) by default. OptionalFieldFormats=0xffffffff ------------------------------- PageBorderDisplay=1 ------------------- Zero Don't display a border or its shadow around the drawing page. Non-zero Display a border and its shadow around the drawing page. PrintMethodUsesSystemDefault=0 -------------------------------------- Determines which printer the Print method will use. 0 The Print method prints the drawing's cached printer. (Default behavior for releases prior to 5.0c.) 1 The Print method prints to the system default printer, which can be different than the drawing's cached printer. The printer information cached in the drawing is NOT changed, even if the system default printer is different from the drawing's cached printer. PromptForSummaryInfo=1 ---------------------- 0 Do not prompt for summary information when saving a file for the first time. 1 Prompt for summary information. PutAllInRegistry=0 ------------------ Set this value to 1 to have Visio write all settings to the registry. PutAllInRegistry can be set through the Visio UI. Select Tools>Options, click on the Advanced tab, and check Put all settings in Windows registry. Click Ok to dismiss the dialog and have the settings written. This replaces IniShowAll from previous versions of Visio. RegionComplexity=150 --------------------- To enable faster redraw, this number determines the maximum number of: * Rectangles used to make up the drawing window's update region. * "Top-level" shapes that can contribute invalid rectangles to the update region (that is, the number of objects that can contribute their bounding boxes). In releases prior to 5.0c, this number was hard coded as 5. If this number is exceeded, then the overall encompassing rectangle for all invalid objects is used to invalidate the drawing window, and ALL objects in the rectangle will be redrawn. RegistrationFlags=0x1D6F ------------------------ To combine options, add values from the following list: 0x0001 Register for Visio 1.0 OLE objects. 0x0002 Register for Visio 2.0 OLE objects. 0x0004 Register for Visio 3.0 OLE objects. 0x0008 Auto-convert Visio 2.0 and Visio 3.0 embedded objects to Visio 4.0 format. 0x0010 Do not auto-convert Visio 2.0 or Visio 3.0 embedded objects to Visio 4.0 format. 0x0020 Register the Visio file extensions. 0x0040 Register support for Lotus Notes F/X. 0x0100 Register Visio Automation. 0x0200 Use UNC syntax if running from a network drive. For best results, do not set this flag on Novell networks. 0x0400 Register for Visio 4.0 customizable UI objects. 0x0800 Register for Visio 4.0 OLE objects. 0x1000 Register the shell extensions for Windows 95. SaveFileFormat=0 ---------------- Sets the default file format used when saving Visio files 0 = Visio 2000 format 1 = Visio 5.0 format ShowDefaultFont=0 ================= Non-zero to display the font specified by DefaultFontName enclosed in angle brackets (< >) at the top of the font list. If you format text in the default font, Visio automatically uses whatever font is defined as the default on a user's system. ShowKanaFindUI=0xffff ---------------- Asian text settings found on the Regional Settings tab of the Tools>Options dialog. 0xffff = use system settings 0x1 = Show 0x0 = Hide ShowLostStencilAlert=0 ---------------------- Determines whether to display an alert when a document is opened, and a referenced stencil can not be found. 0 = Do not display alert 1 = Display alert ShowTextRuler=0 --------------- Toggles the display of the text ruler (shown when editing text) 0 = Do not display text ruler 1 = Display text ruler ShowVerticalTextUI=0 -------------------- Asian text settings found on the Regional Settings tab of the Tools>Options dialog. 0xffff = use system settings 0x1 = Show 0x0 = Hide SingleInstanceFileOpen=1 ------------------------ Determines whether to run a new instance of Visio every time a Visio file is opened by double-clicking it in the Windows Explorer. Zero Run a new instance each time a file is double-clicked. Non-zero Open all files in a single instance of Visio; run a new instance only if one is not already running. SnapGridX=8 SnapGridY=8 ----------- The distance in pixels that an object must be from a grid line before the object snaps to that grid line in the x (horizontal) or y (vertical) direction. SnapGuideX=10 SnapGuideY=10 ------------ The distance in pixels that an object must be from a guide before it snaps to that guide in the x (horizontal) or y (vertical) direction. SnapPointX=10 SnapPointY=10 ------------ The distance in pixels that an object must be from a connection point or vertex before the object snaps to that point in the x (horizontal) or y (vertical) direction. SnapRulerX=4 SnapRulerY=4 ------------ The distance in pixels that an object must be from a ruler subdivision before the object snaps to that tic in the x (horizontal) or y (vertical) direction. SpellAPI=0 ---------- 0 Use the spell checker installed with Visio. 1 Use the spell checker provided with Microsoft Word. SpellLibraryPath= ----------------- The location of the DLL that Visio uses to check spelling. If you change the SpellLibraryPath entry, make sure you also change SpellAPI to the correct setting for the new DLL. Note that 16-bit Visio requires a 16- bit spell checker, and 32-bit Visio requires 32-bit spell checker. StartUpPath=Startup --------------------------- The location of Visio add-on executables and libraries that contain add- ons to run when Visio is launched. Can be relative to the location of VISIO.EXE or fully qualified. StatusDisplay=1 --------------- Zero The status bar is not displayed Non-zero The status bar is displayed StencilDisplayMode=0 -------------------- Determines how stencils are displayed (set via the Stencil Toolbar) 0 = Names and Icons 1 = Icons only 2 = Names only StencilIconsAsButtons=1 ----------------------- Non-zero Create a button-style border around auto-updating master icons. StencilPath=Solutions ------------------------------------------------ The location of stencils that appear in the New dialog box and the Stencils dialog box. This path can be relative to the location of VISIO.EXE or fully qualified. Multiple paths are separated by a semicolon. For example: StencilPath=stencil;c:\mydata\visio StopCircularLinks=1 ------------------- Non-zero Prevents some of the problems with circular OLE links by not forwarding data change notifications. StretchBltMode=0 ---------------- Determines the appearance of bitmaps when they are stretched or compressed or displayed at other than 100% magnification. 0 Visio chooses the appropriate mode for the type of bitmap. 1 Preserves black pixels at the expense of colored or white pixels. This is the default. 2 Preserves colored or white pixels at the expense of black pixels. 3 Deletes eliminated lines and does not preserve them. TemplatePath=Solutions --------------------- The location of templates and stencils that appear in the New dialog box. This path can be relative to the location of VISIO.EXE or fully qualified. Multiple paths are separated by a semicolon. For example: TemplatePath=template;c:\mydata\visio TextAutoZoomFontSize=8 ---------------------- The font size that activates auto-zooming of text. TextBaselineAlignment=1 ----------------------- Zero Use top alignment for text output. This setting can be helpful for certain printers that have trouble with rotated text. Non-zero Use baseline alignment for text output. TileStencilWindowWidth=172 -------------------------- The width in screen pixels of the stencil window, including the scroll bar, when the window is tiled. TipsDialogs TipsDrawing TipsEnabled TipsRulers TipsShapeSheet TipsStencil=1 -------------- Enable the display of screen tips for various aspects of the Visio UI. These settings can be changed via the Visio UI. Select Tools>Options and click on the General Tab. Check/Uncheck the options in the Enable Screen Tips frame. 0 = Do not display screen tips 1 = Display screen tips TurnOffBitMapCache=0 -------------------- Zero Cache linked or embedded objects that are opaque as bitmaps for faster screen redraw. Non-zero Don't cache objects as bitmaps. UIDefaultFontCharset=0xFFFF ---------------------- The character set of the font used in Visio's user interface, as defined in the Windows logical font structure for that font. Common character set values are 0 for ANSI, 2 for Symbol, and 255 for OEM (system- dependent). "0xFFFF" tells Visio to use the current system defaults. UIDefaultFontFamily=0xFFFF ------------------------ The family of the font used in Visio's user interface, as defined in the Windows logical font structure for that font. "0xFFFF" tells Visio to use the current system defaults. UpdateIconBorderOnly=0 ---------------------- Non-zero to update only the border of the icon, so it looks three- dimensional. UseRGBForDocumentColors=2 ------------------------- This affects only drivers that use color palettes. UseRGBForPatternLines=0 ----------------------- A value of 1 tells Visio to use RGB when drawing patterned lines on color palette devices. This is a workaround for the behavior of certain video systems. UseRGBForUIColors=2 ------------------- 0x01 Use RGB colors when running standalone. 0x02 Use RGB colors when running in-place. UserName=Name ------------- Used to initialize the Creator section in the Properties dialog box, as well as the text for the Document Creator text field. UserName can be set in the Options dialog box. ZoomMode=0 ---------- 0 The center of the selection remains stationary when zooming. 1 The selection is centered in the window when zooming. [document] section ================== The [document] section contains state information that is specific to the current document. Much of this information is also stored in the Visio data file. AutoScaleConversionRatio=8 -------------------------- Visio uses this setting to determine when to automatically scale masters when the master's scale differs from the drawing page scale by this ratio. ConnectDisplay=1 ---------------- Non-zero if connection points are displayed; zero if not. CustPropAnchorState=10 (Bottom Right corner) ---------------------- Determines where the custom property window is anchored. Top = 1 Bottom = 2 Left = 4 Right = 8 Floating = 16 CustPropAutoHeight=0 -------------------- Determines whether or not to automatically size the window for the contents. 0 = Do not resize the window 1 = Resize the window CustPropAutoHide=0 ------------------ Determines whether or not to automatically close the window when the mouse is no longer over it. 0 = Do not automatically hide the window 1 = Automatically hide the window CustPropDisplay=0 ----------------- Determines whether to display the custom property window 0 = Do not display the window 1 = Display the window CustPropPos=0 0 --------------- X, Y coordinates of the upper left corner of the Custom Property Window. 1st value = X, 2nd value = Y CustPropRect=0 0 150 150 ------------------------ Left, Top, Right, and Bottom coordinates of the custom property window. In that order. DrawingExplorerAnchorState=5 DrawingExplorerAutoHide=0 DrawingExplorerDisplay=0 DrawingExplorerPos=0 0 DrawingExplorerRect=0 0 273 240 ------------------------------- See CustProp settings above. GridDensity=4 ------------- The density of the grid in subdivisions per inch. GridPage=1 ---------- Non-zero if the grid is displayed on the drawing page; zero if not. GuideDisplay=1 -------------- Non-zero if guides are displayed; zero if not. MaxUndo=10 ---------- The maximum number of commands in the undo buffer. MeasurementSystem_Angle=81 MeasurementSystem_Drawing=73 MeasurementSystem_Duration=44 MeasurementSystem_Page=73 MeasurementSystem_Text=50 -------------------------- The default units to use if a user doesn't type any units and no units were previously specified. _Angle, _Page, _Text, and _Duration indicate the units specified in the Default Units of Measure section of the Options dialog box, while _Drawing indicates the units specified in the Measurements section of the Page Properties dialog box. Settings are based on the following constants: 43 Elapsed weeks 44 Elapsed days 45 Elapsed hours 46 Elapsed minutes 47 Elapsed seconds 49 Picas and points 50 Points 51 Picas 52 Ciceros and didots 53 Didots 54 Ciceros 65 Inch (decimal) 66 Foot 67 Feet and inches 68 Mile (decimal) 69 Centimeter 70 Millimeter 71 Meter 72 Kilometer 73 Inch (fractional) 74 Miles (fractional) 75 Yards 81 Angles in decimal degrees 82 Angles in degrees-minutes-seconds 83 Angles in radians 84 Angles in minutes-seconds 85 Angles in seconds NewMasterAlign=2 ---------------- Default alignment for new masters. 1 Left 2 Center 3 Right NewMasterAutoUpdate=1 --------------------- Non-zero to automatically update master icons to reflect changes to the master. NewMasterIconSize=1 ------------------- The default size of a new master. 1 Normal 2 Tall 3 Wide 4 Double PageBreakDisplay=0 ------------------ 0 Do not show page breaks during print preview. 1 Show page breaks. PanZoomAnchorState=9 PanZoomAutoHide=0 PanZoomDisplay=0 PanZoomPos=0 0 PanZoomRect=0 0 205 175 ----------------------- Set CustProp settings above. RulerDensity=16 --------------- The density of the rulers in subdivisions per inch. RulerDisplay=1 -------------- Non-zero if the ruler is displayed; zero if not. ShowFormulas=1 -------------- Zero Display values in cells in the ShapeSheet window. This is the same as checking Values on the View menu in the ShapeSheet window. Non-zero Display formulas in cells in the ShapeSheet window. This is the same as checking Formulas on the View menu in the ShapeSheet window. SizePosAnchorState=6 SizePosAutoHeight=1 SizePosAutoHide=0 SizePosDisplay=0 SizePosPos=0 0 SizePosRec=0 0 150 150 ---------------------- See CustProp settings above. [Toolbars] ShowTooltips=1 -------------- Display Tooltips for the Toolbars. 0 = Do not display tooltips 1 = Display tooltips [VisioImports] section ====================== In the [VisioImports] section, the text to the left of the equal sign (=) is displayed in the File Type box in the Picture dialog box. The text to the right of the equal sign is the filter file name and the file extension supported by that filter, separated by a comma. Adobe Illustrator File=imps_9.flt,AI Computer Graphics Metafile=imcgm9.flt,CGM CorelDRAW! Drawing File Format=imcdr9.flt,CDR Encapsulated Postscript File=imps_9.flt,EPS IGES Drawing File Format=imigs9.flt,IGS Macintosh PICT Format=impct9.flt,PCT Micrografx Designer Version 3.1=imdrw9.flt,DRW Tag Image File Format=ibtif9.flt,TIF Zsoft PC Paintbrush Bitmap=ibpcx9.flt,PCX [VisioExports] section ====================== In the [VisioExports] section, the text to the left of the equal sign (=) is displayed in the File Type box in the Save As dialog box. The text to the right of the equal sign is the filter file name and the file extension supported by that filter, separated by a comma. Adobe Illustrator File=emps_9.flt,AI Computer Graphics Metafile=emcgm9.flt,CGM Encapsulated Postscript File=emps_9.flt,EPS IGES Drawing File Format=emigs9.flt,IGS Macintosh PICT Format=empct9.flt,PCT Microsoft Windows DIB=ebbmp9.flt,BMP Tag Image File Format=ebtif9.flt,TIF Zsoft PC Paintbrush Bitmap=ebpcx9.flt,PCX [StencilServer] section ======================= The names and window positions of the stencils opened by double-clicking a stencil file name in File Manager in the Explorer in Windows 95/98. A stencil launched in this way appears in a floating stencil window so you can drag masters into the documents of other applications. [colors] section ================= The [colors] section contains entries you can set to fine-tune Visio colors for a particular monitor, such as a gray scale monitor. The format of the three numbers is (red,green,blue) where (0,0,0) is black and (255,255,255) is white. ColorConstant ColorInherited ColorNonConstant ColorTouched ---------------- These entries indicate various states in Windows 95 dialog boxes. If Visio is running under Windows NT 3.51, these entries are ignored. ColorCellBorder=0 0 0 --------------------- The color of the cell border in the ShapeSheet window. ColorEmptyCell=255 255 255 -------------------------- The color of an empty cell in the ShapeSheet window. ColorFullScreenBackground=0 0 0 ------------------------------- The color of the screen background in full screen mode. ColorGlueHighlight=255 0 0 -------------------------- The color of the Glue highlight. ColorGridBackground=255 255 255 ------------------------------- The background color used to draw grid lines. ColorGridForeground=192 192 192 ------------------------------- The foreground color used to draw grid lines. ColorGroupBackground=255 255 192 -------------------------------- The background color of the group editing window. ColorGuideBackground=255 255 255 -------------------------------- Guides are dithered so this is the background color used to draw guides. ColorGuideForeground=0 0 255 ---------------------------- Guides are dithered so this is the foreground color used to draw guides. ColorManySelect=255 0 255 ------------------------- The color used when many items are selected. ColorMasterName=0 0 0 --------------------- The color of the label text if a master is not selected in the stencil window. ColorMasterNameBackground=128 255 128 ------------------------------------- The background color for the label text if the master is not selected in the stencil window. ColorNameCell=192 192 192 ------------------------- The color of name cells in the ShapeSheet window. ColorNameCellLabel=255 0 0 -------------------------- The color of text in a name cell in the ShapeSheet window. ColorNonPage=192 255 255 ------------------------ The color of the paste board, which is the area that surrounds the drawing page in the Visio window. ColorPage=255 255 255 --------------------- The color of the drawing page. ColorPageBorder=0 0 0 --------------------- The color of the page border. ColorPageShadow=192 192 192 --------------------------- The color of the drawing page's drop shadow in the Visio window. ColorPreviewBackground=128 128 128 ---------------------------------- The background color of the print preview window. ColorPrimary=0 255 0 -------------------- The color of the selection box for the primary selection. ColorRulerLabel=0 0 0 --------------------- The color of the ruler label. ColorSecondary=0 255 255 ------------------------ The color of the selection box for the secondary selection. ColorSelMasterName=255 255 255 ------------------------------ The color of label text when a master is selected in the stencil window. ColorSelMasterNameBackground=0 0 127 ------------------------------------ The background color of the label text if a master is selected in the stencil window. ColorStencilBackground=128 255 128 ---------------------------------- The color of the stencil window. ColorSubselectedGroup=128 128 128 --------------------------------- The color of a sub selected group. ColorValueCell=255 255 255 -------------------------- The color of a value cell in the ShapeSheet window.